Xiaoliang Jin

Xiaoliang Jin

Xiaoliang-Jin

Associate Professor

Canada Research Chair in Advanced Manufacturing

B.Sc., M.Sc. (Beihang University), Ph.D. (University of British Columbia), Canada Research Chair in Advanced Manufacturing

phone:  (604) 827-3541
email:  xjin@mech.ubc.ca
website:   amp.mech.ubc.ca
office:  KAIS 3103

Research Interests

  • Manufacturing processes for advanced materials
  • Modeling and experimental studies for machining processes
  • Machining mechanics and dynamics
  • Vibration assisted machining
  • Micro machining
  • Hybrid additive manufacturing and machining
  • Surface integrity
  • System design and instrumentation for manufacturing

Current Research Work

  • Machining of carbon fiber reinforced polymers (CFRP)
  • Hybrid additive manufacturing – machining processes
  • Tool-chip interaction in the machining of advanced metal alloys
  • Mechanics and dynamics of micro-cutting process
  • Vibration-assisted machining for enhancing the machining performance

Recent Publications

  • Yang, S., Clare, A.T., Bennett, C., Jin, X., 2024. Informing Directed Energy Deposition Strategies Through   Understanding the Evolution of Residual Stress. Additive Manufacturing, 79, p.103907.
  • Li, B., Song, C., Lu, Z., Jin, X., Zhao, L., 2024. Tool Wear Prediction in Edge Trimming of MD CFRP Considering Interlaminar Effect. Journal of Manufacturing Processes, 109, pp.481-500.
  • Yang, S., Jin, X.*, Engin, S., Kountanya, R., El-Wardany, T., Lee, S.Y., 2023. Effect of Cutting Fluids on Surface Residual Stress in Machining of Waspaloy. Journal of Materials Processing Technology, 322, p.118170.
  • Li, B., Lu, Z., Jin, X.*, Zhao, L., 2023. Tool Wear Prediction in Milling CFRP with Different Fiber Orientations Based on Multi-channel 1DCNN-LSTM. Journal of Intelligent Manufacturing, pp.1-20.
  • Fazlali, M., Jin X.*, 2023. Time-Varying Tool-Chip Contact in the Cutting Mechanics of Shear Localization. ASME Journal of Manufacturing Science and Engineering, p. 1-24, doi: https://doi.org/10.1115/1.4062749.
  • Song C., Jin X.*, 2023. Frictional Damage Mechanism for Matrix Failure in Cutting Unidirectional CFRP. ASME Journal of Manufacturing Science and Engineering, 145(6), p.061005.
  • Jin, F., Bao, Y., Li, B. and Jin, X., 2022. Tool wear prediction in edge trimming of carbon fiber reinforced polymer using machine learning with instantaneous parameters. Journal of Manufacturing Processes, 82, pp.277-295.
  • Fazlali, M., Ponga, M. and Jin, X., 2022. Predictive model of chip segmentation in machining of high-strength metallic alloys. Journal of Materials Processing Technology, 308, p.117723.
  • Song, C. and Jin, X., 2022. Analytical modeling of chip formation mechanism in cutting unidirectional carbon fiber reinforced polymer. Composites Part B: Engineering, p.109983.
  • Jin, X. and Song, C., 2022. Orthogonal cutting mechanics of multi-directional carbon fiber reinforced polymer with interlaminar bonding effect. CIRP Annals.
  • Maroju, N.K. and Jin, X., 2022. Effect of Speed Ratio on Shear Angle and Forces in Elliptical Vibration Assisted Machining. Journal of Materials Processing Technology, p.117498.
  • Shi, J., Jin, X. and Cao, H., 2022. Chatter stability analysis in Micro-milling with aerostatic spindle considering speed effect. Mechanical Systems and Signal Processing, 169, p.108620.
  • Shi, J., Cao, H. and Jin, X., 2022. Dynamics of 5-DOF aerostatic spindle with time-varying coefficients of air bearing. Mechanical Systems and Signal Processing, 172, p.109005.
  • Ma W., Jin X., Yu J., Yang Y., Liu X. and Shen R., 2022. Oppositely Oriented Series Multiple Tuned Mass Dampers and Application on a Parallel Machine Tool. Mechanical Systems and Signal Processing, 163, p.108196.
  • Fazlali M., Ponga M., Jin X., 2022. Analytical Modeling of Shear Localization in Orthogonal Cutting Processes. ASME Journal of Manufacturing Science and Engineering. doi: https://doi.org/10.1115/1.4051605.
  • Song C., Jin X., 2021. Fracture Angle Prediction for Matrix Failure of Carbon-Fiber-Reinforced Polymer Using Energy Method. Composites Science and Technology, 211, p.108869.
  • Huang, F., Jin, X., 2021. Surface Texture Generation Using High-feed Milling with Spindle Speed Modulation. Precision Engineering, 72.
  • Xu, X., Jin, X., 2021. 3-D Finite Element Modeling of Sequential Oblique Cutting of Unidirectional Carbon Fiber Reinforced Polymer. Composite Structures, 256, p.113127.
  • Ma W., Yang Y., Jin X., 2021. Chatter Suppression in Micro-milling using Shank-mounted Two-DOF Tuned Mass Damper, Precision Engineering, 72.
  • Yan, D., Jin, X., 2020. Characterization of Shear Band Formation and Microstructure Evolution during Orthogonal Cutting of Ti-5553: Part I—Shear Angle, Strain and Strain Rate. Journal of Materials Engineering and Performance, 29(6), pp.4063-4074.
  • Song C., Jin X., 2020. Shearing-buckling Mechanism in Orthogonal Cutting of Unidirectional Carbon Fiber Reinforced Polymer. Journal of Materials Processing Technology, 280, p.116612.
  • Shi J., Cao H., Maroju N.K., Jin X., 2020. Dynamic Modeling of Aerostatic Spindle with Shaft Tilt Deformation. ASME Journal of Manufacturing Science and Engineering, 142(2).
  • Hu Q., Chen Y., Jin X., Yang J., 2020. A Real-time C3 Continuous Tool Path Smoothing and Interpolation Algorithm for Five-axis Machine Tools. ASME Journal of Manufacturing Science and Engineering, 142(4).
  • Maroju N.K., Jin X., 2019. Mechanism of Chip Segmentation in Orthogonal Cutting of Zr-Based Bulk Metallic Glass. ASME Journal of Manufacturing Science and Engineering, 141(8), p.081003.
  • Shi J., Cao H., Jin X., 2019. Investigation on the Static and Dynamic Characteristics of 3-DOF Aerostatic Thrust Bearings with Orifice Restrictor. Tribology International, 138, 435-449.
  • Gao J., Jin X., 2019. Effects of Ultrasonic Vibration Assistance on Chip Formation Mechanism in Cutting of Ti-6Al-4V, ASME Journal of Manufacturing Science and Engineering, 141(12): 121007.
  • Wan S., Jin X., Maroju N.K., Hong J., 2019. Effect of Vibration Assistance on Chatter Stability in Milling. International Journal of Machine Tools and Manufacture, 145, p.103432.
  • Wan S., Maroju N.K., Jin X., 2019. Development of a 2D Vibration Stage for Vibration-Assisted Micro Milling. Instrumentation Journal. 6(1), 98-108.
  • Hu Q., Chen Y., Jin X., Yang J., 2019. A Real-Time C3 Continuous Local Corner Smoothing and Interpolation Algorithm for CNC Machine Tools. ASME Journal of Manufacturing Science and Engineering. 141(4).
  • Park C.I., Wei Y., Hassani M., Jin X., Lee J., Park S., 2019. Low Power Direct Laser-Assisted Machining of Carbon Fibre-reinforced polymer. Manufacturing Letters. 22, 19-24.
  • Wan S., Li X., Su W., Yuan J., Hong J. and Jin X., 2019. Active Damping of Milling Chatter Vibration via a Novel Spindle System with an Integrated Electromagnetic Actuator. Precision Engineering. 57, 203-210.

For a full list of publications, visit my profile on:
Google Scholar